Filter Cleaner

Scope of Application:

Suitable for swimming pools, hot tubs, saunas, and SPA pools.

Product Characteristics:

This product is a solid with no odor.

Product Description:

Various pollutants in the pool water accumulate on the surface of the filter due to filtration, and these pollutants cannot be cleaned thoroughly through backwashing alone. Residual pollutants can reduce the filtration efficiency of the filter and even turn the filter itself into a source of contamination for the pool water. This product can remove various pollutants remaining in the filter, ensuring the filter maintains effective filtration.

Usage and Dosage:

Usage:Start by backwashing the filter. Dilute and dissolve this product, then add it to the hair filter. Turn on the pump, allowing the product to flow to the filter. After that, turn off the pump and let it stand for 1 hour. Finally, flush out the pollutants in the filter using the backwashing method.

Dosage:Use one bottle for diatomaceous earth filters each time. For quartz sand filters with a diameter below 45 centimeters, use one bottle each time. For filters with a diameter increase of 30 millimeters, double the dosage.

Precautions:

1,This product is irritating, so take necessary precautions.

2,The product is flammable, so store it sealed.

3,This product is flammable and may cause combustion or explosion when exposed to an open flame, high heat, or oxidants. Keep away from fire sources, heat sources, and oxidants.

4,Do not swallow.

Packaging Specifications:  

1kg bottle, 6 bottles per box.